|
PIPER AUTOCONTROL III - Faceplate insert
(Price $33.75)
Material - .032" Matte black / white
text, 1 piece
PIPER AUTOCONTROL IIIB -
Faceplate insert
(Price $33.75)
Material - .032" Matte black / white
text, 1 piece
 |
|
PIPER AUTOCONTROL III & IIIB -
Faceplate installation directions
Before you begin: Check to see if you received the proper faceplate
insert. Are the numbers the same as your radio? Does it fit correctly? Although the holes and text
may be the same, many
faceplate manufacturers made different widths or heights of the
same faceplate. (Just to make life a little more interesting.)
1. Remove your faceplate from radio.
2. Sand off the top painted surface of the old faceplate. This will provide necessary illumination of text for replacement faceplate insert.
3. Remove the double-face tape backing from the new insert.
4. Place the new insert onto the faceplate lightly to align as best as
possible. Press firmly to secure it.
5. To stop any light from bleeding out the edges or holes,
carefully apply some black paint around these edges. Use a Testor'sŪ black paint stick or similar brand found in most hobby stores.
6. Reinstall faceplate on the radio.
7. Re-install all the knobs onto the radio.
8. Tell all your aircraft buddies about Aircraft Engravers and place the enclosed sticker on the metal case for future
reference.
|
