To Print these directions - In your browser, click Print from the File menu. This document will print to the correct width because of the word wrapping feature. Use Back to return to previous screen.

____________________________________________________________________________

ALTIMATIC III B - Faceplate insert
Material - .032" Matte black / white text, 1 piece.  Backed with double faced tape for easy installation.

____________________________________________________________________

____________________________________________________________________

ALTIMATIC III B - Faceplate installation directions

Before you begin: Check to see if you received the proper faceplate insert. Are the numbers the same as your radio? Does it fit correctly? Although the holes and text will be the same, many faceplate manufacturers made different widths or heights of the same faceplate. (Just to make life a little more interesting)

1. Have this insert installed by an avionics shop if you do not have all the proper tools, are not a qualified technician or are not sure you are capable of doing this job. 
2.

Remove your faceplate from radio.
3. Sand off the top painted surface of the old faceplate. This will provide necessary illumination for the text of the replacement faceplate insert.
4. Remove the double-face tape backing from the new insert.
5. Place the new insert onto the faceplate lightly to align as best as possible. Press firmly to secure it.
6. To stop any light from bleeding out the edges or holes, carefully apply some black paint around these edges. Use a Testor'sŪ black paint stick or similar brand found in most hobby stores.
7. Reinstall faceplate on the radio.
8. Re-install all the knobs onto the radio.
9. Tell all your aircraft buddies about Aircraft Engravers and place the enclosed sticker on the metal case for future reference. 
Aircraft Engravers 151 North Granby Rd. Granby, CT 06035
Phone: (860) 653-2780    Fax: (860) 653-7324    E-mail: info@engravers.net    Web site: engravers.net