| 1. |
Have this insert installed by an avionics shop if you do not have
all the proper tools, are not a qualified technician or are not sure
you are capable of doing this job. |
| 2. |
If your faceplate needs painting, remove it from the radio.
Otherwise, go to #8. |
| 3. |
Tape up the center glass area to protect it from painting. Also
tape the backside to protect from any paint over spray. |
| 4. |
Fill any dents with a plastic filler or similar material. |
| 5. |
Lightly sand with a fine grit sandpaper for good paint adhesion. |
| 6. |
Paint the faceplate with a quality paint such as
Krylon's 1613
Semi-Flat Black paint. |
| 7. |
Remove the protective tape. |
| 8. |
Remove the original decal inserts. |
| 9. |
Remove the double face tape backing from the new insert. |
| 10. |
Place the new inserts onto the faceplate. Reinstall faceplate
and knobs onto the radio. |
| 11. |
Tell all your aircraft buddies about
Aircraft Engravers and place the enclosed sticker on the metal case
for future reference. |
