Quick Print Info - In your browser, click Print from the File menu. This document will print to the correct width because of the word wrapping feature. Use Back to return to previous screen.

____________________________________________________________________________

KING MK-12B  - Faceplate insert
Material - .032" Matte black / white text, 3 pieces. Backed with double faced tape for easy installation.

____________________________________________________________________

____________________________________________________________________

KING MK-12B Audio Panel - Faceplate installation directions

Before you begin: Check to see if you received the proper faceplate insert. Are the numbers the same as your radio? Does it fit correctly? Although the holes and text will be the same, many faceplate manufacturers made different widths or heights of the same faceplate. (Just to make life a little more interesting)

1. Have this insert installed by an avionics shop if you do not have all the proper tools, are not a qualified technician or are not sure you are capable of doing this job. 
2. DO NOT remove the faceplate from the radio unless you are a fully qualified avionics repair person.
3. Remove the knobs. Double check for the proper fit of the new faceplate.
4. Use a small, sharp wood chisel to remove all the raised text and trim accent borders. Be careful not to gouge out excess material, Sand flush as needed.
5. If the faceplate areas not covered by the new insert does not need painting then go to #10. Use tape and paper to protect the lens areas, the metal chassis, the knob shafts and the raised area that has the MK12B on it from any paint over-spray.
6. Fill any dents with a plastic auto body or a model builders filler.
7. Lightly sand with a fine grit sandpaper for good paint adhesion.
8. Paint the faceplate with a quality paint such as Krylon'sŪ 1613 Semi-Flat Black paint.
9. When the paint is dry remove the protective tape and paper.
10. To paint the bands on the knob tops apply a small quantity of silver paint onto a scrap piece of paper. Place the tops of the knobs into this paint and rotate the knob to get an even coat of paint. 
11. Remove the double face tape backing from the new insert.
12. Place the new insert onto the faceplate, being careful to align the holes and window areas carefully. Press firmly to attach the faceplate. Reinstall the knobs onto the radio.
13. Tell all your aircraft buddies about Aircraft Engravers and place the enclosed sticker on the metal case for future reference. 
Aircraft Engravers 151 North Granby Rd. Granby, CT 06035
Phone: (860) 653-2780    Fax: (860) 653-7324    E-mail: info@engravers.net    Web site: engravers.net