ARC/CESSNA CC-310A - Faceplate inserts
____________________________________________________________________
____________________________________________________________________
ARC/CESSNA CC-310A - Faceplate installation directions
Before you begin: Check to see if you received the proper faceplate insert. Are the numbers the same as your radio? Does it fit correctly? Although the holes and text will be the same, many faceplate manufacturers made different widths or heights of the same faceplate. (Just to make life a little more interesting)
| 1. | Have this insert installed by an avionics shop if you do not have all the proper tools, are not a qualified technician or are not sure you are capable of doing this job. |
| 2. |
If your faceplate needs painting, remove it from the radio. Otherwise, go to #8. |
| 3. | Tape the back from any paint over spray. Do not tape the inside lip area as this has to be painted. |
| 4. | Fill any dents with a plastic filler or similar material. |
| 5. | Lightly sand with a fine grit sandpaper for good paint adhesion. |
| 6. | Paint the faceplate with a quality paint such as Krylon's 1613 SemiŠ Flat Black paint. If you want a silver border around the outer rim use a Testors' silver paint stick. They are found in most hobby stores. |
| 7. | Remove the protective tape. |
| 8. | Remove the double face tape backing from the new insert. |
| 9. | Place the new inserts onto faceplate. Reinstall faceplate and knobs onto the radio. |
| 10. | If there is no lens in front of the identification code numbers, you can clean them up by applying some rubbing alcohol or glass cleaner on a cotton swab and lightly rubbing the digits until clean. |
| 11. | Tell all your aircraft buddies about Aircraft Engravers and place the enclosed sticker on the metal case for future reference. |