| 1. |
Have this insert installed by an avionics shop if you
do not have all the proper tools, are not a qualified technician or
are not sure you are capable of doing this job. |
| 2. |
If your faceplate needs painting, remove it from the radio. Otherwise, go to #9.
|
| 3. |
Tape the back from any paint over spray. Do not tape the inside lip area as this has to be painted.
|
| 4. |
Fill any dents with a plastic auto body filler or similar material.
|
| 5. |
Lightly sand with a fine grit sandpaper for good paint adhesion.
|
| 6. |
Paint the faceplate with a quality paint such as Krylon's® 1613
Semi Flat Black paint. If you want a silver border around the outer rim use a Testors'®
silver paint stick. They are found in most hobby stores. |
| 7. |
Remove the protective tape.
|
| 8. |
Remove the old decal. This will let the light for the text to show through the new insert.
|
| 9. |
Remove the double face tape backing from the new insert.
|
| 10. |
Place the new inserts onto faceplate. Reinstall faceplate and knobs onto the radio.
|
| 11. |
Tell all your aircraft buddies about Aircraft Engravers and place the enclosed sticker on the metal case for future
reference.
|
