|
|
| Watch our new web site being built and be part of making it a site worthy of a return visit.
Whenever you see an image of the new web site while
browsing you can click on it and go to that new web page.
Some pages are very rough, while others are almost
complete. There you will see what we're working on and if
you wish you can email us any comments, corrective
criticism or suggestions to help us make this the best
site possible. You can also send us an email if you would
like a return email notification when a certain web page
is finished or when the whole web site is completed and
published.
Thank you.
Wayne Cahoon
Owner |
 |
Just $0.75 a word!
Standard
Placards are any placards that meet these
requirements:
 | Text height 0.100", 0.125" or
0.150" in capital letters. |
| Text spacing of additional lines is166% of text height
(1 2/3). |
| Text is center justified. |
| Length of placard is determined by longest line of text. |
| Placards are made with 0.020" thick matte finish material. |
| All edges are straight cut or chamfered
cut if requested. |
| Choice of colors; Black placard/White text,
White placard/Black text, Red placard/White text, Yellow Placard/Black text. |
| The placards have a
double faced tape applied to the back surface for an easy
peel and stick application. |
NOTE: For any other text sizes or special requirements see Custom
Placards and Overlays.
Don't worry about all the specifications, just view the
examples below to see what will be produced.
 |
Total Costs for these 15 placards, $24.75
23 words @ $0.75 = $17.25 plus $7.50 for shipping and handling |
 |
| Pick image to view |
|
Pick image to view, pick 'carb heat' for
close-up |
Also see the drawing
specifications if more complex drawings are needed.
| Aircraft
Engravers |
| 151 North Granby Road |
| Granby,
CT 06035 |
| USA |
| info@engravers.net
(860) 653-2780
Fax (860) 653-7324 |
|
|
| |
|
|
| |
|
|
|
